Cornices in Canada
Cornices Traditionally, elaborate cornice moulding was either made from moulded plaster, or from solid wood such as Oak, then cut to fit around the room.
For a time Paint Grade Pine or Poplar were also a popular choice because any gaps could be filled then covered with paint, whereas flaws in stainable solid wood moulding are harder to mask.
Today’s easy to install, MDF mouldings are easier to finish and offer a variety of decorative profiles.
MDF is less condusive to warping and expansion because it has no grain, it also costs less than finger jointed paint grade wood. Elite Moulding has taken this a step further with EliteTrim?„?.
Read more on Cronices
Related Posts
Dentil Cornices
Dentil Cornices
Elite Dentil cornices are all made by hand. The possess of rolling on compo paste, as used in making the other EliteTrims simply didn't work.
We just could not...
Cornices
Cornices are produced with plywood frames. Padded with polyester batting between board and fabric. One-quarter inch welting is standard on top and bottom of cornices. The inside...
Photos of Round Column
Not sure what a Round Column from Elite Mouldings Inc. looks like. Take a look at the image gallery:
...
Photos of Appliques
Not sure what a Appliques from Elite Mouldings Inc. looks like. Take a look at the image gallery:
...
Photos of Accent Walls
Not sure what a Accent Walls from Elite Mouldings Inc. looks like. Take a look at the image gallery:
...
Sitemap
|
