Bead Board, is a trend that’s on the way back and is very easy to install using our Elite Beadboard Kit.
 We offer unique, extra wide beads in our beadboard system, 2.5″ wide, up to twice as wide as others. The stiles are made from HDF (high density fiberboard), considerably harder and heaver than MDF , Elite beadboard stiles are only 5.5″ wide, much easier to carry, cut, customize and install than 4 x 4 or 4 x 8 foot panels that you may have seen elsewhere.
We recommend a overall height of about 38″ but if you prefer, you can go as height as 44″. To go higher, you’ll need to install a spacer of the desired additional height and the same thickness of the bead board (11/32″) on the wall at floor level. The spacer is required so that the baseboard will sit flat when installed. The stiles are pre-cut at 38″ for ease of handling and to reduce UPS shipping charges. If you prefer to have you bead board less than 38″ high, simply cut off what you don’t need.
Our bead board is not water proof by any means but it is water resistant meaning that if you finish the edges and paint it properly it will look great for years to come.
We have professionals standing by to help you with any problems or questions you may have about the product or installation. Get factory direct pricing and UPS delivery right to your door! Special reduced shipping rates.
The components include: cap trim, board trim (Bead-222) and a baseboard.
Related Posts
Beadboard Wainscoting
Beadboard Wainscoting
To achieve a Victorian look on an interior wall, try a beadboard wainscot. You can buy beadboard at your local lumberyard. Here are some things to keep in mind...
Beadboard installation
Beadboard comes in either planks or sheets, and both are typically 4 feet wide. Naturally, the sheets install much faster than the planks, and many products are tongue-and-groove so they...
Bead Board Winscoting
Bead Board Winscoting
We offer unique, extra wide beads in our beadboard system, 2.5" wide, up to twice as wide as others. The stiles are made from HDF (high density fiberboard),...
Instructions for crown Moulding
Preparation
Clean all surfaces of dirt and loose particles. Moldings may be painted before or after installation. Nomastyl moldings made from polystyrene (white center) requires that you use a latex...
Wainscot in Canada
In the days before paint was scrubbable and wallpaper was mass-produced, wainscoted walls served a practical purpose; covering the lowest and most vulnerable portion of a wall. Covering with wood...
Sitemap
|
